K-Rend Base Coat

K-Rend base coat is the first layer that helps the render bond firmly and form an even base. It is the preferred mix for levelling uneven walls and creating a solid key before adding coloured or finishing coats.

What is K Render Base Coat?

A K Rend base coat is a specially blended render layer designed to enhance surface grip and improve overall render stability. It is applied between the substrate and the finishing coat, acting as a cohesive interface. A perfectly applied K render base coat creates a uniform surface for subsequent renders and helps reduce cracking.

What is the K Rend Base Coat Used For?

This preparatory coat readies walls for their finishing render. Common uses include:

• Preparing and reinforcing masonry or blockwork ahead of the finish layer.
• Evening out rough or damaged backgrounds.
• Creating a consistent surface ready for top coats.
• Reinforcing multi-coat render systems.
• Acting as a bonding coat over mixed or porous substrates.

Popular options like HP12 Base Coat, HP14 K Rend, and HPX Base Coat each address distinct substrate and performance requirements.

Types Of K Render Base

Each type of surface may need a different blend of render base. Popular formulas include:

• K Rend HP12 Base Coat – A general-purpose high-adhesion mix for most rendering backgrounds. It is the most commonly used K Rend first coat for standard substrates.
• K Rend HP14 Base Coat – Finer-grain formulation for extra-smooth finishes. Used mainly when a high-finish outcome is desired.
• K Rend HPX Base Coat – Flexible, polymer-enhanced option ideal for challenging or mixed substrates. It produces excellent results on low-porosity materials.

Benefits Of Base Coat K Render

The right K-Rend base coat means better bonding, among these other benefits:

• Forms a firm, level backing ready for finishing layers.
• Enhances bonding and limits surface movement.
• Minimises cracking and prevents coating separation.
• Formulated with a breathable yet water-resistant composition.
• Easy to prepare and spread using a trowel or spray system.
• Helps maintain the durability and consistency of the render system over time.

Why Choose Our Base Coat For Render?

Builders and renderers rely on Insulation Wholesale for the full K Rend range supply because we offer:

• Genuine HPX, HP14, and HP12 K Rend base coats with BBA marking and BSI Kitemark certification.
• Trade pricing and flexible bulk-buy deals.
• Data sheets and compliance documentation.
• Clear product guidance and friendly support.
• Nationwide supply network.
• Reliable dispatch.

Achieve consistent render quality on every project with K Rend base coats. Choose HP12, HP14, or HPX for dependable bonding and long-term protection, delivered quickly anywhere in the UK.

FAQ

Where to buy K Rend base coat?

Purchase directly from trusted suppliers, such as Insulation Wholesale, for genuine K Rend products and enjoy nationwide delivery to your site or residential address.

How much K Rend base coat per m2?

Typical coverage is approximately 8–10 kg per m² at a thickness of 6 mm, depending on the substrate condition.

How to apply K Rend base coat

1. Step: Mix the base coat K-Rend with clean water as directed until a homogeneous mixture is achieved.
2. Step: Apply in an even coat using a trowel or spray unit.
3. Step: Level off and allow sufficient curing (typically 24 hrs).
4. Step: The surface should now be ready for finishing coats.