110mm PIR Insulation

An insulation product remarkable for its thermal efficiency, the 110mm PIR insulation board is perfect for areas that require high thermal efficiency, such as roofs and walls.

What is 110mm PIR Insulation?

PIR insulation 110mm boards are similar to all other PIR panels in terms of material composition, rigidity, thermal performance, low moisture absorption, and stability. The only difference is that these specific panels are 110mm thick, whereas other PIR panels are thicker or thinner.

What are 110mm PIR boards used for?

PIR boards 110mm are an apt solution for insulating commercial properties and residential buildings. You can install them on:

• Timber and steel-framed walls
• Internal and external masonry walls
• Many types of floors
• Ceilings, flat and pitched roofs
• Lofts

Types of 110mm PIR Sheets

Insulation Wholesale offers 110mm PIR insulation from these manufacturers:

• Ecotherm
• Mannok
• Recticel
• IKO Enertherm
• Unilin
• Kingspan
• Celotex

Benefits of 110mm PIR insulation boards

• Exceptional thermal effectiveness — 110mm polyisocyanurate insulation minimises heat loss due to its low thermal conductivity, which is around 0.022–0.026 W/mK.
• Energy savings — A reduction in heat loss leads to improved energy efficiency, plus increased energy savings over time.
• Low water absorption — PIR insulation’s low vapour permeability means it is not highly susceptible to water damage, except when exposed to high amounts of water for an extended period.
• Smooth installation — Like other PIR boards, 110mm PIR insulation sheets are simple to install.

Why Choose Our 110mm PIR Boards?

Durability — Our 110mm PIR sheets are built to provide long-term reliability.

Variety — Pick your preferred size or brand. We have several 110mm PIR sheets available for your selection.

Simplified selection criteria — Not sure which board will serve you best? Use our filter tool to select PIR insulation based on different features.

Ready to use PIR insulation on your latest retrofitting project? Get the best deals on 110mm PIR insulation now!

FAQ

How to cut 110mm PIR insulation?

Start by measuring your work area. Mark where to cut on the PIR board, then use a handsaw or power saw to cut through the board.

How to install 110mm PIR insulation?

PIR polyisocyanurate insulation 110mm is an easy material to install. Once you’ve measured the space and determined the correct number and size of boards, simply lift each board and fit it into the space you wish to insulate. If building regulations require you to have a vapour control layer, check the installation guide for instructions on how to create one.

How much 110mm PIR insulation do I need?

The number of 110mm PIR insulation boards you’ll use depends on the area that needs insulation, and whether you’re insulating the entire room, from walls to flooring and the roofing. It’s important to calculate the total surface area that requires insulation coverage to determine the number of PIR boards needed for the job.