-
140mm Celotex XR4140 PIR Insulation Board 2400mm x 1200mm (8′ x 4′) 2.88m2
140mm Celotex XR4140 is a polyisocyanurate (PIR) insulation core with composite aluminium foil facings on both sides. Celotex is a multi-purpose insulation board suitable for use in pitched roofs, ceilings, floors and walls.
£60.18£72.22 Ex VATInc VAT£20.90£25.08 Per M2 Add to cart -
140mm Kingspan Kooltherm K103 Insulation Floorboard 2400mm x1200mm Pack of 2 (5.76m2)
140mm Kooltherm K103 is a premium phenolic core floor insulation solution, designed to deliver exceptional performance with solid concrete or suspended timber floors.
£305.17£366.20 Ex VATInc VAT£52.98£63.58 Per M2 Add to cart -
140mm Kingspan Thermaroof TR26 PIR Insulation Board 2400mm x 1200mm (8′ x 4′) Pack of 2 (5.76m2)
140mm Kingspan TR26 Thermaroof is high-performance insulation that has a fiber-free rigid thermoset polyisocyanurate (PIR) core. Suitable for flat roof application waterproofed with mechanically fixed single-ply waterproofing.
£240.64£288.77 Ex VATInc VAT£41.78£50.14 Per M2 Add to cart -
140mm Kingspan Thermaroof TR27 PIR Insulation Board 1200mm x 1200mm Pack of 2 (2.88m2)
140mm Kingspan Thermaroof TR27 is a high performance insulation with a fibre-free rigid thermoset polyisocyanurate (PIR) core. It is used to insulate flat roofs waterproofed with fully adhered single-ply, partially bonded built-up felt, mastic asphalt and cold liquid applied waterproofing.
£123.14£147.77 Ex VATInc VAT£42.76£51.31 Per M2 Add to cart -
140mm Recticel Eurothane GP PIR Insulation Board 2400mm x 1200mm (8′ x 4′) 2.88m2
140mm Recticel Eurothane GP is a polyisocyanurate (PIR) insulation core with composite aluminium foil facings on both sides. Recticel is a multi-purpose insulation board suitable for use in pitched roofs, ceilings, floors and walls.
£57.15£68.58 Ex VATInc VAT£19.84£23.81 Per M2 Add to cart -
140mm Recticel Eurowall Full Fill Cavity Wall Insulation Board 1200mm x 460mm Pack of 8 (4.41m2)
140mm Recticel Eurowall Full Fill boards snap together with interlocking edges, forming a continuous thermal barrier that optimises performance of cavity wall insulation.
£142.28£170.74 Ex VATInc VAT£32.26£38.71 Per M2 Add to cart -
140mm Rockwool Flexi Slab Acoustic Insulation 1200mm x 600mm 2.88m2 Pack
140mm Rockwool Flexi has been designed as a multi-use, dual-purpose acoustic and thermal mineral wool insulation with a unique flexible edge along one side. It is suitable for use all over the home, in pitched roof rafters, framed external walls, internal partitions, intermediate floors, separating walls and floors, and timber suspended ground floors.
£39.18£47.02 Ex VATInc VAT£13.60£16.32 Per m2 Add to cart -
40mm Thick 140mm Pipe Diameter Rockwool Rocklap Aluminium Foil Faced Pipe Lagging 1000mm
40mm Thick 140mm Pipe Diameter Rockwool Rocklap Aluminium Foil Faced Pipe Lagging (length – 1000mm) is a premium thermal insulation material engineered to improve energy efficiency and minimise heat loss in pipe systems.
£22.44£26.93 Ex VATInc VAT Add to cart
140mm Insulation
140mm insulation is a deep insulation thickness used to deliver high thermal performance when strong heat control is needed, rather than a minor thermal improvement. At 140mm, insulation effectively slows heat flow, resulting in more stable indoor temperatures throughout the seasons.
This thickness is typically specified where thermal performance is prioritised over space constraints.
What is 140mm insulation thickness?
140mm insulation thickness describes the depth of the insulation layer after installation – 140 millimetres from the internal (warm) side to the external (cold) side. This depth is often specified because it enables reliable thermal control without stacking multiple layers.
At 140mm thick insulation, heat transfer is slowed enough that indoor temperature changes are more gradual. Warm air stays inside longer during cold weather, and summer heat takes longer to enter the building.
Because 140mm depth takes up more space than lighter options, it is typically incorporated at the design stage.
What is 140mm thick insulation used for?
140mm insulation thickness is usually installed in:
- External walls, including cavity walls and timber or steel frame builds.
- Warm roofs and flat roofs, where depth helps prevent cold spots.
- Floors over unheated spaces, such as garages or voids.
- High-performance refurbishment projects that apply modern standards to older buildings.
Thick 140mm insulation is less common in tight retrofits but commonly specified in new-build construction and extensions designed for energy efficiency.
Types of 140mm insulation
Here’s how the main 140mm insulation options compare:
Glass wool insulation
This is made by spinning molten glass into fibres. At 140mm, it traps a large volume of still air, limiting heat transfer.
- Flexible enough to friction-fit between studs or joists.
- Good at reducing noise as well as heat loss.
- Non-combustible (Euroclass A1 or A2, depending on product)
- Requires careful installation to avoid gaps or excessive compression, which can reduce performance.
Rock Mineral Wool insulation
Produced from volcanic rock, this material is denser than glass wool.
- Strong fire resistance. Typically classified as Euroclass A1 for fire performance
- Holds its shape well at full depth
- Performs reliably in walls, floors, and roofs
- Also helps with sound control
PIR insulation boards
PIR is a rigid foam panel with low heat transfer.
- Delivers high thermal performance for its size
- Keeps its shape and thickness over time
- Foil facings can assist with vapour control and installation detailing
- Requires accurate cutting and tight jointing to maintain performance
Phenolic Foam
This is a high-performance board similar to PIR but with lower thermal conductivity.
- Excellent thermal efficiency.
- More brittle, so careful handling is needed.
- Common in projects with tight energy targets.
Some manufacturers produce wood fibre and specialist foam products at this depth. But these are less common and usually chosen for specific design reasons rather than general trade use.
FAQ
Where to buy 140mm thick insulation?
You can buy 140mm thick insulation online from Insulation Wholesale. We stock multiple materials at this depth, including phenolic foam, PIR, and mineral wool. We supply clear product options, reliable availability, and pricing that works for real projects – whether you are ordering a few boards or a full load. If you need help choosing the right material for your build-up, our team can help.
How to cut 140mm insulation?
- Mineral wool: Use a long insulation knife or saw. Cut a little oversized so it fills the space properly.
- Rigid boards (PIR or phenolic): Score with a sharp blade, then snap over a straight edge.
Always cut on a flat surface for stability. This helps achieve cleaner, more accurate cuts.
How to fix 140mm insulation?
Fixing depends on the product and location:
- Between studs or joists: Friction-fit mineral wool so that it fills the space without sagging.
- Rigid boards on walls or roofs: Fix mechanically using appropriate insulation fixings, then seal all joints.
- Floors: Support insulation fully so it does not drop or bow over time.
- Some systems also require adhesive bonding or taping. Check manufacturer guidance.
Insulation must remain in full contact with the surface it protects. Any air gap becomes a weak point that compromises performance.
