-
50mm Isover Acoustic Partition Insulation Roll – Glass Mineral Wool 15.60m2
50mm Isover Acoustic Partition Insulation Roll is a glass mineral wooldesigned to reduce sound transmission between walls and floors, creating quieter and more comfortable spaces.
£44.05£52.86 Ex VATInc VAT£2.82£3.38 Per m2 Add to cart -
50mm Knauf Acoustic Insulation Roll – Glass Mineral Wool 16.2m2
50mm Acoustic Insulation Roll from Knauf is a Glass Mineral Wool roll, designed for use in internal wall and floor applications, to offer sound absorption and noise reduction properties.
£43.33£52.00 Ex VATInc VAT£2.67£3.20 Per m2 Add to cart -
50mm ODE Acoustic Roll Insulation 12m2 Roll
50mm ODE Insulation Acoustic Roll is designed to reduce sound transmission, making it an ideal solution for creating quieter indoor environments. Its flexible and simple-to-install design effectively absorbs sound, making it perfect for both residential and commercial spaces.
£31.07£37.28 Ex VATInc VAT£2.59£3.11 Per m2 Add to cart -
50mm Rockwool RWA45 Acoustic Insulation Slab 1200 x 600mm 6.48m2 Pack
50mm Rockwool RWA45 has been developed for thermal, acoustic and fire performance in a range of construction types. It is suitable for applications on partition walls, ceilings, floors and roofs.
£29.96£35.95 Ex VATInc VAT£4.62£5.54 Per m2 Add to cart -
50mm Superglass Acoustic Partition Roll Insulation 15.60m2 Roll
50mm Superglass Acoustic Partition Roll (APR) is a lightweight, non-combustible glass mineral wool insulation roll. It is suitable for the following applications: internal walls and floors, timber and metal stud partitions, drylining systems and separating walls and floors. Manufactured at a minimum density of 10kg/m³.
£45.14£54.17 Ex VATInc VAT£2.89£3.47 Per m2 Add to cart -
50mm Knauf Rocksilk RS45 Building Insulation Slab 1200mm x 600mm 7.2m2 Pack
50mm Knauf Insulation Rocksilk RS45 is a Rock Mineral Wool slab, designed for use in multiple thermal and acoustic applications. It is non-combustible with the best possible Euroclass A1 reaction to fire classification.
POA Get a quote -
50mm Rockwool Flexi Slab Acoustic Insulation 1200mm x 600mm 8.64m2 Pack
50mm Rockwool Flexi has been designed as a multi-use, dual-purpose acoustic and thermal mineral wool insulation with a unique flexible edge along one side. It is suitable for use all over the home, in pitched roof rafters, framed external walls, internal partitions, intermediate floors, separating walls and floors, and timber suspended ground floors.
POA Get a quote -
50mm Rockwool Rainscreen Duo Slab 1200mm x 600mm 69.12m2 Pallet
50mm Rainscreen Duo Slab is dual-density insulation specifically developed for use within ventilated cladding systems, as well as sealed systems such as curtain walling. Once installed, the robust outer surface of the slabs, in combination with a factory applied water-repelling agent, acts to resist rain ingress during construction.
POA Get a quote -
50mm Rockwool RW3 Acoustic Insulation Slab 1200mm x 600mm 69.12m2 Pallet
50mm Rockwool RW3 Slabs can be applied to an array of general building applications for acoustic, thermal and fire protection of partition walls, ceilings, floors and roofs.
POA Get a quote -
50mm Rockwool RW4 Acoustic Insulation Slab 1200mm x 600mm 69.12 m2 Pallet
50mm Rockwool RW4 Slabs can be applied to an array of general building applications for acoustic, thermal and fire protection of partition walls, ceilings, floors and roofs.
POA Get a quote -
50mm Rockwool RW5 Acoustic Insulation Slab 1200mm x 600mm 69.12m2 Pallet
50mm Rockwool RW5 Slabs can be applied to an array of general building applications for acoustic, thermal and fire protection of partition walls, ceilings, floors and roofs.
POA Get a quote
50mm Insulation Non combustible
50mm insulation is a relatively thin thermal layer used when space is limited, but heat loss still needs to be reduced. In most cases, it does not replace deep insulation systems.
Instead, it improves performance where thicker products simply will not fit. It boosts comfort and efficiency without major structural changes.
What is 50mm thick insulation?
50mm thick insulation measures 50 millimetres from face to face when installed.
With 50mm insulation, heat transfers more slowly than it would through bare masonry, timber, or metal. The material achieves this by:
- Trapping still air (or gas) inside its structure
- Reducing direct heat-conduction paths through the building fabric
50mm thickness insulation is on the thinner side and relies heavily on the quality of the material, not just depth. High-performance boards can outperform softer products at the same thickness.
This is why thin 50mm insulation is often paired with other layers.
What is 50mm thin insulation used for?
50mm insulation is used where build-ups must stay slim, such as:
- Internal wall linings where room size matters
- Service zones in timber frames
- Upgrades to older buildings with shallow cavities
- Floors or ceilings where levels cannot be raised much
It is also used to reduce thermal bridging when correctly detailed and continuous. Even a thin layer can prevent heat from escaping quickly from cold surfaces.
50mm insulation is not chosen for maximum performance. It is chosen to control heat loss without redesigning the structure.
Types of 50mm insulation thickness
The most widely used 50mm insulation materials are:
EPS Insulation (50mm Expanded Polystyrene)
At 50mm thickness, EPS:
- Offers basic thermal resistance.
- Handles moisture well. It is, however, not vapour-tight, and should be used with a vapour control layer.
- Has good compressive strength for its weight.
EPS relies mainly on trapped air, so its thermal performance per millimetre is lower than that of rigid foams. It is commonly chosen when cost and moisture tolerance are desired over outright efficiency.
Phenolic Insulation
At 50mm insulation depth, phenolic:
- Delivers very high thermal resistance per millimetre
- Performs well where space is limited
- Is commonly used in wall linings and soffits
It insulates effectively per millimetre, with 50mm thickness able to match or exceed the performance of thicker PIR or mineral wool.
PIR (Polyisocyanurate)
At insulation 50mm thick, PIR:
- Provides strong thermal resistance
- Is easy to cut and fit accurately
- Works well in walls, floors, and roofs
PIR is often the default choice because it is robust and easy to handle.
Rock Mineral Wool Insulation
At 50mm thick insulation, mineral wool:
- Offers sound absorption as well as thermal resistance
- Is vapour-permeable
- Offers excellent fire resistance.
Its thermal performance per millimetre is lower than that of rigid boards. But its acoustic and fire performance often makes it the right choice for spaces that require high sound and fire protection.
Additional insulation materials available at 50mm include glass mineral wool, XPS, vacuum insulation panel, and stone wool.
FAQ
Where to buy 50mm thick insulation?
You can buy 50mm insulation online from Insulation Wholesale. We stock a wide range of 50mm thick insulation from leading manufacturers, including rigid boards and mineral wool. We offer:
- Clear technical advice
- Consistent UK stock
- Fast delivery options
- Trade pricing
If unsure which 50mm insulation is right for your project, our team will walk you through the best options.
How to cut 50mm insulation?
Rigid boards (PIR, phenolic, EPS): Use a fine-tooth saw or insulation knife. Score, snap, then trim cleanly.
Mineral wool: Use a long serrated blade. Compress slightly, cut once, and avoid tearing.
How to install 50mm insulation?
50mm insulation often sits behind plasterboard, between studs, or over solid surfaces. The fixing method depends on the substrate used.
Installation must keep the insulation continuous:
- Fit boards tightly together.
- Avoid crushing soft materials. Insert them gently, ensuring they fill the whole space.
- Seal gaps where air could move.
- Keep insulation dry during install.
How good is 50mm insulation?
50mm insulation is moderately effective, not powerful. It improves comfort and reduces heat loss, but it does not transform a building on its own.
Here’s what 50mm insulation does well:
- Cuts surface heat loss – Cold walls and ceilings lose heat fast. Adding insulation 50mm thick reduces that loss and raises surface temperatures. This reduces cold spots and the risk of condensation.
- Works where space is limited – Thin 50mm insulation fits behind plasterboard and inside shallow frames. It is also ideal for underfloors where thicker materials will not fit.
- Improves efficiency when layered – On its own, it gives a noticeable improvement. Combined with other insulation layers, it becomes much more effective.
However, 50mm insulation thickness has some limits:
- It cannot meet high-performance targets alone – UK standards for new builds and major upgrades often need more than 50mm thickness insulation.
- Material choice matters more at this depth – At insulation 50mm thickness, high-performance rigid boards outperform softer materials by a wide margin.
