-
90mm Celotex GA4090 PIR Insulation Board 2400mm x 1200mm (8′ x 4′) 2.88m2
90mm Celotex GA4090 is a polyisocyanurate (PIR) insulation core with composite aluminium foil facings on both sides. Celotex is a multi-purpose insulation board suitable for use in pitched roofs, ceilings, floors and walls.
£40.45£48.54 Ex VATInc VAT£14.05£16.86 Per M2 Add to cart -
90mm Celotex Thermaclass Cavity Wall 21 Insulation Board 1190mm x 450mm Pack of 6 (3.21m2)
90mm Celotex Thermaclass Cavity Wall 21 is a PIR T&G insulation board designed for full-fill cavity wall applications. Low-emissivity foil facing provides versatility during installation, allowing for a 10mm residual cavity.
£122.68£147.22 Ex VATInc VAT£38.22£45.86 Per M2 Add to cart -
90mm Ecotherm Eco-Cavity Full Fill Insulation Board Tongue And Groove 1200mm x 450mm Pack of 4 (2.16m2)
Eco-Cavity Full Fill is suitable for full fill cavity wall applications while maintaining a residual 10 mm cavity. The residual cavity helps resist moisture transfer, aids installation, and accommodates mortar squeeze. The tongue and groove edges to ensure a continuous layer of insulation, increasing protection from wind driven rain and aiding installation.
£58.00£69.60 Ex VATInc VAT£26.85£32.22 Per M2 Add to cart -
90mm Ecotherm Eco-Versal Rigid PIR Insulation Board 2400mm x 1200mm (8′ x 4′) 2.88m2
90mm Ecotherm Eco-Versal is a polyisocyanurate (PIR) insulation core with composite aluminium foil facings on both sides. Ecotherm Eco-Versal is a multi-purpose insulation board suitable for use in pitched roofs, ceilings, floors and walls.
£40.89£49.07 Ex VATInc VAT£14.20£17.04 Per M2 Add to cart -
90mm Jablite HP+ 70E External Wall Insulation Board 1200mm x 600mm (4′ X 2′) Pack of 6 (4.32m2)
90mm Jablite HP+ 70E External Wall Insulation Board is designed to enhance thermal efficiency for external walls. It can be bonded or mechanically fixed, providing reliable insulation solution.
£49.26£59.11 Ex VATInc VAT£11.40£13.68 Per M2 Add to cart -
90mm Kingspan Kooltherm K103 Insulation Floorboard 2400mm x1200mm Pack of 3 (8.64m2)
90mm Kooltherm K103 is a premium phenolic core floor insulation solution, designed to deliver exceptional performance with solid concrete or suspended timber floors.
£298.12£357.74 Ex VATInc VAT£34.50£41.40 Per M2 Add to cart -
90mm Kingspan Kooltherm K106 Cavity Board Insulation 1200mm x 450mm Pack of 4 (2.16m2)
90mm Kingspan Kooltherm K106 Cavity Board is a premium performance insulation with a fibre-free rigid thermoset phenolic core with a thermal conductivity of just 0.019 W/mK across all thicknesses.
£88.75£106.50 Ex VATInc VAT£41.09£49.31 Per M2 Add to cart -
90mm Kingspan Kooltherm K110 Soffit Board Insulation 2400mm x 1200mm Pack of 3 (8.64m2)
90mm Kingspan Kooltherm K110 Soffit Board Insulation enhances thermal performance in soffit areas with its slim, efficient design. It’s easy to install and improves energy efficiency.
£317.31£380.77 Ex VATInc VAT£36.73£44.08 Per M2 Add to cart -
90mm Kingspan Thermaroof TR26 PIR Insulation Board 2400mm x 1200mm (8′ x 4′) Pack of 3 (8.64m2)
90mm Kingspan TR26 Thermaroof is high-performance insulation that has a fiber-free rigid thermoset polyisocyanurate (PIR) core. Suitable for flat roof application waterproofed with mechanically fixed single-ply waterproofing.
£249.28£299.14 Ex VATInc VAT£28.85£34.62 Per M2 Add to cart -
90mm Recticel Eurothane GP PIR Insulation Board 2400mm x 1200mm (8′ x 4′) 2.88m2
90mm Recticel Eurothane GP is a polyisocyanurate (PIR) insulation core with composite aluminium foil facings on both sides. Recticel is a multi-purpose insulation board suitable for use in pitched roofs, ceilings, floors and walls.
£38.79£46.55 Ex VATInc VAT£13.47£16.16 Per M2 Add to cart -
90mm Recticel Eurowall Full Fill Cavity Wall Insulation Board 1200mm x 460mm Pack of 10 (5.52m2)
90mm Recticel Eurowall T&G Full Fill Cavity is an advanced thermal insulation panel tailored for use in cavity wall systems, delivering exceptional energy efficiency and robust performance.
£126.32£151.58 Ex VATInc VAT£22.88£27.46 Per M2 Add to cart -
90mm Superglass 32 Timber & Rafter Roll Insulation 4.45m2 Roll
90mm Superglass 32 Timber & Rafter Roll covers 4.45m2, providing snug and energy-saving insulation between timbers and rafters.
£52.65£63.18 Ex VATInc VAT£11.83£14.20 Per m2 Add to cart -
90mm Superglass Cladding Mat 40 Thermal & Acoustic Roll 12.78m2
90mm Superglass Cladding Mat 40 is a resilient, medium dense and non-combustible glass mineral wool insulation roll with exceptional durability and high tear strength. The roll is supplied 1200mm wide to allow quick installation and minimum on-site cutting and waste.
£41.20£49.44 Ex VATInc VAT£3.22£3.86 Per m2 Add to cart -
Buy in Bulk & Save
1-14 15+ £47.43£56.92 £41.26£49.51 
90mm URSA 35 Timber Frame Roll 7.54m2
90mm URSA Timber Frame Roll 35 is a lightweight, non-combustible, glass mineral wool product. It is suitable for use in both timber and metal framed walls.
£47.43£56.92 Ex VATInc VAT£6.29£7.55 Per m2 Add to cart
90mm Insulation
90mm insulation refers to insulation materials manufactured to a 90mm thickness for use in floors, walls, and roofs. It is a commonly specified thickness size in most construction projects where drawings call for an insulation thickness 90mm.
What is 90mm thick insulation?
90 mm thick insulation is insulation that measures 90mm from face to face. It is a mid-range depth, thicker than 50mm but thinner than 150mm. This makes it a practical choice when space is limited or when you require specific thermal performance.
Insulation Wholesale supplies 90mm soft insulation, including mineral wool rolls and slabs, and 90 mm hard insulation, including PIR boards. Each material has different performance characteristics depending on its use.
What is 90mm insulation used for?
In practice, this thick 90mm insulation is installed in building elements requiring moderate thermal resistance without excessive build-up depth:
- Walls – between studs or in cavities as part of the overall wall build‑up.
- Floors – under screed or between joists to cut heat loss.
- Roofs – between rafters or joists, if the depth allows.
- Partitions & ceilings – where space is limited, but some insulation is still needed.
Using insulation 90mm thick in these elements helps reduce heat loss, lower energy bills, and keep rooms more comfortable year‑round.
Types of insulation in 90mm thickness
Two main types of 90mm insulation thickness are commonly used:
90mm Soft insulation
These are flexible, often fibrous products, such as glass wool or mineral wool. They are compressible and fit effortlessly between timber or steel framing. Lightweight and easy to cut, they are the better choice for acoustic and fire protection.
A slab of typical mineral wool will have an R-Value of R 2.3–2.7 at 90 mm thick insulation (based on typical lambdas for mineral wool).
While mineral wool 90 mm can be used between rafters in cold roofs, especially where acoustic or fire performance is valued, greater thicknesses are often required to meet current U-value targets.
It can be installed in stud partitions or in external walls with a cavity, but greater thicknesses may be required to achieve lower U-values.
90mm Rigid insulation
These are rigid boards made from foam polymers like PIR. They are flat, firm, and provide a reliable, straight edge. Great for snug fits and minimising gaps that let heat escape. They are often preferred when high thermal performance is needed within a limited space.
PIR Rigid Boards (high‑performance foam) – Often deliver a thermal resistance of 4.0–4.5 m²·K/W at 90 mm thickness, depending on manufacturer. Some PIR boards show ~4.25–4.50 m²·K/W at 90 mm thick insulation.
PIR has a low thermal conductivity (~0.021–0.022 W/m·K), so even at 90 mm, it effectively resists heat.
PIR 90mm boards are popular under screeds or between joists when you need a decent R‑value without lowering finished floor level too much.
Often used in warm-roof builds between rafters or above decking where space is constrained.
Used in stud walls (timber or metal) or cavity walls where space is limited because it gives a strong R‑value for the space.
Other boards (EPS / XPS / Phenolic) – EPS/XPS polystyrene generally sit between mineral wool and PIR in performance.
EPS typically achieves ~R 2.6–3.0 m²·K/W at 90 mm thickness. Phenolic foam can slightly outperform PIR, but is not as commonly used in standard UK wall/floor boards.
XPS and EPS boards at 90mm thickness are well-suited for ground floors because they resist moisture well and have high compressive strength.
Benefits of 90mm thick insulation
This thickness offers a practical balance for many jobs:
- Thermal control – slows heat flow well for typical wall/floor/roof slots.
- Space‑friendly – does not eat up too much space where depth matters.
- Ease of installation – flexible insulation, such as mineral wool, compresses into place while hard insulation cuts perfectly and fits snugly.
- Energy saving – when installed correctly, it helps reduce heating costs.
- Acoustic performance – soft insulation, such as mineral wool, provides effective sound absorption; rigid boards offer limited acoustic benefit.
Why choose our insulation 90mm?
Here’s why you can confidently choose 90mm soft insulation or 90mm hard insulation from Insulation Wholesale:
- We stock 90mm insulation panels from trusted UK manufacturers.
- Our 90mm stock covers a range of soft and hard types, so you can pick what suits your task.
- All 90mm boards and slabs are sized correctly for building work and are easy to cut and place.
- We are on standby to help you choose the right item.
FAQ
Where to buy 90mm Insulation?
You can buy 90mm thick insulation online from Insulation Wholesale. We stock a wide range of soft and rigid insulation materials suitable for trade and DIY projects.
