9.5mm Plasterboard

The 9.5mm plasterboard is one of the slimmer plasterboard types available. It is a gypsum plasterboard with strong paper facings, manufactured to a flat, uniform finish and ready for installation on ceilings and walls.

What Is 9.5mm Plasterboard Sheet?

9.5mm plasterboard is a flat board made of gypsum (a soft mineral) sandwiched between paper facings. It is 9.5 mm thick – thinner than the most common 12.5 mm board. Because it is lighter, it’s easier to handle, cut, and fix.

These boards are available in either straight edges (9.5 mm plasterboard square edge) or slight bevels on the long sides (9.5 mm tapered edge plasterboard). Both edge types help with how joints are finished later.

The most common 9.5mm size is 1200 × 2400mm, though smaller formats – like 900 x 1800mm – for handling and patch repairs are also available.

What Are 9.5mm Plasterboards Used For?

This is a light-duty interior lining board used in:

• Fixing internally to timber or metal studs.
• Lining internal walls (9.5 mm plasterboard on walls) to prepare them for plastering or decoration.
• Lining ceilings, especially in minor or non-structural work (9.5 mm plasterboard ceiling). Only used where joist centres are close and loads are minimal.

It is not intended for heavy-impact zones or high-performance applications on its own.

Types of 9.5mm Plaster Boards

Here are the main 9.5mm boards:

Standard board – the basic version suitable for most drylining work. It is an everyday board. It has a gypsum core with paper faces and no added performance features. Best for dry internal spaces; works well when the wall or ceiling does not require extra fire, moisture, or sound control.

Square edge – this board features straight edges all around (9.5 mm plasterboard square edge), best for butt-joint taping. Square edge boards have straight, flat sides. When two boards meet, they form a tight joint with no recess. This makes them suitable when you plan to skim plaster over the entire surface or tape joints carefully without needing a built-in groove.

Tapered edge – this has sides with a slight V-shape (9.5 mm tapered edge plasterboard), making joint finishing smoother. Tapered edge boards have slightly thinned long edges. That shallow dip creates space for joint tape and compound, helping joints sit flatter once finished. This makes them a good choice for taped and jointed systems where you want a smooth finish without full plastering.

Small-format boards – these are designed for easy fitting in tight spots. Often used for patching, boxing-in, and small refurb work where full boards would not fit well.

Moisture-resistant, fire-rated, and acoustic plasterboards are usually supplied in thicker formats, as higher performance systems typically rely on thicker boards or multi-layer builds.

Benefits of 9.5mm Plaster Board Sheets

Installing a sheet of 9.5mm plasterboard delivers benefits like:

• Easy to lift – lighter than thicker boards and easier to handle on site.
• Faster to fix – screws go in quickly, and the weight is not overwhelming.
• Good for repairs – smaller jobs suit 9.5mm well.
• Slim profile – helps keep slim stud wall buildups without compromising on the available space.
• Smooth finish – provides a smooth base for plastering or jointing before painting.

Why Choose Our Plasterboard Sheets 9.5mm?

At Insulation Wholesale, you get more than just plasterboard. You also benefit from experienced technical support.

We stock the boards you need in trade sizes, so you do not waste time hunting around different stores.

Our team will help you pick the right board edge (square or tapered), and organise delivery straight to your site or workshop, saving you trips hauling long sheets.

We offer bulk pricing, too. If fitting lots of 9.5mm plasterboard sheets, your budget stretches further.

Searching for 9.5mm plasterboards near you? Contact Insulation Wholesale to get 9.5mm plasterboard pricing, or book a delivery slot. We make buying simple and support you every step of the job.

FAQ

Where to buy 9.5mm plasterboard?

You can buy a 9.5mm plaster board right here from Insulation Wholesale. We stock and supply a range of plasterboard options, including the slimmer 9.5 mm versions. Our team supports builders and DIYers alike with advice and easy ordering. We also offer bulk deals and delivery, so you do not have to worry about how to get long boards back to site.

Can you use 9.5mm plasterboard on ceilings?

9.5mm plasterboard is not suitable for heavy fittings or wide spans. But it is fine for light ceilings when fixed correctly:

• Joist centres should be max 400mm. Wider spacing increases the risk of sagging over time.
• Skimming helps reduce sag.

Always follow manufacturer guidance and BS 8212 fixing recommendations for better results.

How much does 9.5mm plasterboard weigh?

9.5mm plasterboard weighs around 6.5kg–7kg per square metre. A 1200 × 2400mm board typically weighs about 19kg–20kg, depending on brand. That weight may change slightly with brand and size.