Use Kooltherm K112 when building or upgrading a steel- or timber-framed wall and want top-notch insulation without bulky, awkward layering.
It is a thin but powerful framing panel – a neat, rigid sheet that delivers strong insulation while fitting neatly between studs or over a frame as sheathing.
K112 insulation keeps walls warm and efficient without adding unnecessary wall thickness.
What is Kooltherm K112?
The core of the Kingspan K112 is made of rigid phenolic foam. The rigid phenolic foam is moisture-resistant and does not degrade when installed in accordance with the manufacturer’s guidance. Because it is a rigid, single-piece panel, K112 remains stable over time without settling or sagging when properly installed.
Both sides of the board have a low-emissivity composite foil facing bonded to the core, which reduces heat loss when installed in a wall assembly.
The panels’ thermal conductivity (λ-value) is just 0.019 W/m·K – a very low value for rigid insulation boards.
It comes in a variety of thicknesses – from 25mm to 150mm. Choose the thickness required to meet your target U-value.
What is Kingspan Kooltherm K112 used for?
Kooltherm K112 is installed for these applications:
Framed walls (timber and steel) – This is the main use of the K112 framing panel. It fits naturally into modern framed construction without adding bulky layers.
Between the studs or over the frame – Kooltherm K112 can be installed inside the stud zones or fixed as a sheathing layer.
New builds, extensions, and refits – K112 helps builders achieve strong U-values when installing new walls or upgrading existing ones.
Lightweight; easy to handle – K112 Kingspan is rigid, easy to cut, and quick to fix.
Benefits of K112 insulation
Here are some advantages of installing Kingspan K112 insulation:
High performance without the bulk – Kingspan K112 gives excellent thermal results while keeping the wall assembly surprisingly slim.
Helps achieve demanding U-value requirements – Kooltherm K112 helps builders achieve modern energy standards even when space and wall depth are limited.
Kingspan Kooltherm K112 is lightweight and easy to trim or resize.
K112 holds its shape, resists sagging, and performs well year after year.
K112 Kingspan fits into framed assemblies with minimal modification.
Its smooth surfaces and tight edges help reduce gaps, supporting better airtightness and overall wall performance.
From sheathing layers to stud-zone insulation, the Kingspan Kooltherm K112 framing board adapts to a range of wall designs.
Why choose our Kingspan K112 framing insulation?
Trusted Kingspan quality – Our genuine K112 Kingspan boards give you insulation you can rely on for years to come.
Supply options suited to projects of all sizes – It is easy for you to order both single boards and full pallets.
Affordable pricing and trade perks – Take advantage of our competitive rates, volume discounts, and special trade deals to save on every project.
Speedy UK delivery – Get your Kooltherm K112 framing board delivered fast.
Expert technical support available – Our team can help with quantities, installation advice, and project planning.
At Insulation Wholesale, you can purchase Kingspan K112 at low wholesale prices with fast delivery for most of items within 2-5 days. Competitive rates guaranteed.
FAQ
Where to buy Kingspan K112?
You can buy the original Kingspan K112 framing board from Insulation Wholesale. We stock a range of thicknesses, offer both single boards and full-pack deals, and deliver across the UK, often with trade discounts or pallet-rate pricing on bulk orders.
How to fit Kingspan K112 insulation?
Start with snug-fitting pieces – Cut each K112 panel so it sits tightly between the studs or against the frame, depending on whether you’re using it in the stud zone or as sheathing. A snug fit helps reduce air gaps.
Place the foil the right way – Fit the foil facing the cavity or the space you’re insulating. Check project specifications or Kingspan’s installation guide for correct orientation.
Fix securely but do not overtighten – For sheathing applications, use appropriate mechanical fixings and spread them evenly across the board. When installed between studs, K112 may stay in place by friction alone, though mechanical support may be required depending on the installation.
Keep joints tight – Line up the edges of each K112 framing board so they sit close together. For high airtightness, tape the joints with at least 70 mm wide self-adhesive foil tape to fully seal them.
How to cut K112 framing insulation?
Mark your line clearly – Use a straight edge to draw your cut line on the K112 Kingspan panel, especially if fitting it between studs where the fit needs to be snug.
Score first, then slice – For most thicknesses, score the foil side with a sharp knife, then press through the board in a couple of passes. For thicker Kooltherm K112, a fine-toothed saw gives a cleaner result.
Snap or separate gently – Once scored or partially cut, the board will break cleanly along the line, thanks to the rigid phenolic core in Kingspan K112.
Keep the installation tidy – Lightly sand or trim rough edges so the K112 insulation sits tight with no gaps.
Wear basic protection – Gloves and a dust mask are enough; Kooltherm does not shed itchy fibres, but it does create light dust when cut.
Where can you use K112?
Timber and steel framed wall assemblies – The K112 Kingspan board fits perfectly between studs or over the frame.
New builds and extensions – Use where you want top insulation without bulky walls.
Retrofits and upgrades – Swap in Kooltherm K112 to improve U-values in existing structures.
Slim-wall applications – Perfect for applications where high thermal performance is required but wall depth is limited.
Suitable wherever easy, reliable installation is required – K112 insulation is lightweight, rigid, and straightforward to fit.
120mm Kingspan Kooltherm K112 Framing Board is a premium performance insulation with a fibre-free rigid thermoset phenolic core. It is used to insulate timber and steel framing systems with thermal conductivity of just 0.019 W/mK across all thicknesses.
£333.92£400.70Ex VATInc VAT£57.97£69.56Per M2Add to cart
50mm Kingspan Kooltherm K112 Framing Board is a premium performance insulation with a fibre-free rigid thermoset phenolic core. It is used to insulate timber and steel framing systems with thermal conductivity of just 0.019 W/mK across all thicknesses.
£429.93£515.92Ex VATInc VAT£24.88£29.86Per M2Add to cart
60mm Kingspan Kooltherm K112 Framing Board is a premium performance insulation with a fibre-free rigid thermoset phenolic core. It is used to insulate timber and steel framing systems with thermal conductivity of just 0.019 W/mK across all thicknesses.
£431.85£518.22Ex VATInc VAT£29.99£35.99Per M2Add to cart
70mm Kingspan Kooltherm K112 Framing Board is a premium performance insulation with a fibre-free rigid thermoset phenolic core. It is used to insulate timber and steel framing systems with thermal conductivity of just 0.019 W/mK across all thicknesses.
£395.96£475.15Ex VATInc VAT£34.37£41.24Per M2Add to cart
80mm Kingspan Kooltherm K112 Framing Board is a premium performance insulation with a fibre-free rigid thermoset phenolic core. It is used to insulate timber and steel framing systems with thermal conductivity of just 0.019 W/mK across all thicknesses.
£451.02£541.22Ex VATInc VAT£39.15£46.98Per M2Add to cart
100mm Kingspan Kooltherm K112 Framing Board is a premium performance insulation with a fibre-free rigid thermoset phenolic core. It is used to insulate timber and steel framing systems with thermal conductivity of just 0.019 W/mK across all thicknesses.
