Collated Drywall Screws Fine Thread

Fine-thread collated drywall screws come in continuous strips for use with automatic screw guns when fixing plasterboard to metal framing. “Fine thread” means the spiral ridges are close together, which helps them bite firmly into thin-gauge metal frames.

What Are Collated Fine Thread Drywall Screws?

Drywall fine thread joined screws are typically zinc-plated or phosphate-coated metal screws, collated on plastic strips compatible with most professional screw guns. Drywall workers load the strip into a collated screw gun, which automatically feeds and drives each screw in a single continuous motion.

Their bugle-shaped heads sit flat against the plasterboard without tearing the surface, and the fine threads wrap tightly around the screw’s shaft. The fine threads run closely along the shaft, so the screws hold best when fixing plasterboards to thin metal studs or tracks rather than wood.

What Are Drywall Collated Fine Drywall Screws Used For?

The fine threads on collated fine-thread plasterboard screws latch onto thin metal without stripping it.

• They are meant for power screw guns and speed installation. Strips are often brand- or system-specific, so check that the strip type matches your screw gun.
• They fix plasterboard to studs and tracks where the metal is thin. These are specialised screws specifically for light-gauge steel, usually 0.6–0.9 mm.
• They hold the board tight and do not pull out easily, especially on metal.
• They work well where wood screws with wide threads would just spin.

FAQ

Where to buy fine thread collated drywall screws?

You can buy drywall fine thread collated screws online from Insulation Wholesale. We stock various lengths, including 55mm fine thread drywall collated screws, and offer screws compatible with most screw guns. Our team can help you select the correct size based on your board thickness and frame type, and we supply clear sizing info with fast delivery options for busy builds.

What lengths of drywall collated fine screws do I use?

Pick a screw that goes through the plasterboard plus at least a few millimetres into the metal stud without over-penetrating.

• 25mm fine-thread collated drywall screws – For single-layer plasterboard to thin metal framing.
• 32mm / 35mm fine thread collated drywall screws – Common for standard partitions or ceilings.
• 41mm / 42mm fine thread collated drywall screws – When boards are thicker or frames sit deeper.
• 50mm / 55mm fine thread collated drywall screws – Extra length for deeper metal sections or double layers.

Shorter screws sit more flush. Longer screws give more grip but should not poke through the other side of the frame.