FREE delivery is available for orders over Ā£500.00 + Vat.

150mm Kingspan Kooltherm K103 Insulation Floorboard 2400mm x 1200mm Pack of 2

SKU: IW8493
(1 customer review)

150mm Kingspan Kooltherm K103 Floorboard is a premium performance floor insulation used to insulate beam and block, concrete, and timber floors that provides a thermal conductivity of just 0.019 W/mK across all thicknesses.

View alternative products

PLEASE NOTE
  • This item is non-refundable.
Lead Time: 2-5 days
£286.98 £344.38 Inc VAT
£143.49 Per Sheet

The average delivery lead time for the majority of orders is 2-3 working days from the date of your order, however, it could extend to 5 working days on rare occasions. Once the order has been placed, a member of staff will then be in contact to confirm a delivery date. A minimum order value of Ā£200.00 ex VAT applies to our green delivery area (see the map on the Delivery Information page). Order value between Ā£200 ā€“ Ā£349.99 ex VAT delivery charge Ā£50 ex VAT.Order valueĀ Ā Ā£350.00 ā€“ Ā£499.99 ex VAT delivery charge Ā£30 ex VAT. Free delivery is available for orders above Ā£500.00+VAT to the green areas on the map. Delivery lead times for orders outside our standard delivery may take up to 7 working days. If you are outside our standard green delivery area, please click on the ā€œSAVE & SHARE YOUR CARTā€ button at the cart stage, select the email option and send it to [email protected] or call us on 0203 318 7316. We will get back with a delivery quote to you shortly.

See Full Transport Policy

In Stock

Additional information

Amount 2
Single Product Coverage

2.88m2

Total pack coverage

5.76m2

Thickness

150mm

Length

2400mm

Width

1200mm

Brand

Kingspan

Application

Floor

Material

Phenolic Foam

Product type

Board

Edging

Square

Facing

Glass Tissue

Thermal conductivity

0.019 W/mk

Fire Rating

C-s2,d0

Compressive Strength

120 kPa (at 10% compression)

Description

150mm Kooltherm K103 is a premium performance fibre-free rigid glass-faced thermoset phenolic core floor insulation with thermal conductivity of just 0.019w/MK. Kingspan K103 is used to insulate floors below + floor slab or floor screed and in a suspended timber floor and below floor joists. (Installation and U-values explained in detail in Data Sheet pages 8-9).
Kingspan K103 is available in a wide range of thicknesses from 25mm to 150mm (please note some densities may be subjected to longer lead times due to special order specifications).
Benefits of 150mm Kooltherm K103 Floorboard
* Easy to handle
* Easy to install
* Unaffected by air infiltration
* Appropriate to be used for new builds and refurbishment projects
* Non-deleterious material which means it is non-hazardous to health.
* Resistant to the passage of water vapour ( achieves greater than 370 MNs/ gm, when tested in +accordance with BS EN 12086: 2013)
*Resists attack by mould and microbial growth
*Resistant to short term contact with petrol and with most dilute acids, alkali and mineral oils

Data Sheet

Download

Declaration of Performance

Download

Questions and answers of the customers

There are no questions yet. Be the first to ask a question about this product.

Send me a notification for each new answer.

1 review for 150mm Kingspan Kooltherm K103 Insulation Floorboard 2400mm x 1200mm Pack of 2

  1. sebastien (verified owner)

    Insulation is a key component for SAAP calculation

    There come a situation where overall SAAP calculation are very tight and everything counts.

    Architect specified Kingspan kooltherm k103 insulation floorboard to be provided for floor build up and underfloor heating. Main contractor wanted to instal any board and we would have probably failed the final SAAP leading to abortive costs. Main advice, be on the lookout. Great selection and stock level and smooth delivery.

    Helpful? 0 0
    • Agnieszka Jankowska

      Dear Sebastien,

      Thank you for sharing your experience with us.

      It’s fantastic to hear that our 150mm Kingspan Kooltherm K103 insulation floorboard met the architect’s requirements and contributed to a successful project outcome. Your advice to remain vigilant in ensuring the correct materials are used is invaluable, and we appreciate you highlighting this aspect. We are pleased that our selection, stock availability, and delivery process met your expectations.

      If you have any further feedback or need assistance in the future, please don’t hesitate to reach out. Thank you for choosing us, and we look forward to serving you again.

      Best Wishes,
      Agnieszka Jankowska
      Customer Support Representative

Add a review

Your email address will not be published. Required fields are marked *

    Additional information

    Amount 2
    Single Product Coverage

    2.88m2

    Total pack coverage

    5.76m2

    Thickness

    150mm

    Length

    2400mm

    Width

    1200mm

    Brand

    Kingspan

    Application

    Floor

    Material

    Phenolic Foam

    Product type

    Board

    Edging

    Square

    Facing

    Glass Tissue

    Thermal conductivity

    0.019 W/mk

    Fire Rating

    C-s2,d0

    Compressive Strength

    120 kPa (at 10% compression)

    Description

    150mm Kooltherm K103 is a premium performance fibre-free rigid glass-faced thermoset phenolic core floor insulation with thermal conductivity of just 0.019w/MK. Kingspan K103 is used to insulate floors below + floor slab or floor screed and in a suspended timber floor and below floor joists. (Installation and U-values explained in detail in Data Sheet pages 8-9).
    Kingspan K103 is available in a wide range of thicknesses from 25mm to 150mm (please note some densities may be subjected to longer lead times due to special order specifications).
    Benefits of 150mm Kooltherm K103 Floorboard
    * Easy to handle
    * Easy to install
    * Unaffected by air infiltration
    * Appropriate to be used for new builds and refurbishment projects
    * Non-deleterious material which means it is non-hazardous to health.
    * Resistant to the passage of water vapour ( achieves greater than 370 MNs/ gm, when tested in +accordance with BS EN 12086: 2013)
    *Resists attack by mould and microbial growth
    *Resistant to short term contact with petrol and with most dilute acids, alkali and mineral oils

    Data Sheet

    Download

    Declaration of Performance

    Download

    Questions and answers of the customers

    There are no questions yet. Be the first to ask a question about this product.

    Send me a notification for each new answer.

    1 review for 150mm Kingspan Kooltherm K103 Insulation Floorboard 2400mm x 1200mm Pack of 2

    1. sebastien (verified owner)

      Insulation is a key component for SAAP calculation

      There come a situation where overall SAAP calculation are very tight and everything counts.

      Architect specified Kingspan kooltherm k103 insulation floorboard to be provided for floor build up and underfloor heating. Main contractor wanted to instal any board and we would have probably failed the final SAAP leading to abortive costs. Main advice, be on the lookout. Great selection and stock level and smooth delivery.

      Helpful? 0 0
      • Agnieszka Jankowska

        Dear Sebastien,

        Thank you for sharing your experience with us.

        It’s fantastic to hear that our 150mm Kingspan Kooltherm K103 insulation floorboard met the architect’s requirements and contributed to a successful project outcome. Your advice to remain vigilant in ensuring the correct materials are used is invaluable, and we appreciate you highlighting this aspect. We are pleased that our selection, stock availability, and delivery process met your expectations.

        If you have any further feedback or need assistance in the future, please don’t hesitate to reach out. Thank you for choosing us, and we look forward to serving you again.

        Best Wishes,
        Agnieszka Jankowska
        Customer Support Representative

    Add a review

    Your email address will not be published. Required fields are marked *

Alternative products