Shop
Showing 641–672 of 1068 results
-
Ronafix Universal Admixture 25L
Ronafix is a single part SBR admixture for cement mortars that enhances physical and chemical properties, allows mortars to be placed in thin sections, provides waterproofing and resistance to frost, and promotes adhesion to building surfaces.
POA Get a quote -
RonaScreed 4 Day Overlay Quick Drying Screed Additive – 18kg Bag
Powder Additive for Quick Drying Screeds.
- Rapid early strength development
- Can receive light foot traffic in 24 hours
- Rapid drying, allowing floor coverings to be laid after 4 days @ 50mm/ 3 days @ 75-100mm
- Rapid strength gain permits early access by following trades
- Compatible with underfloor heating systems
- Suitable for screed pumps
POA Get a quote -
RonaScreed FastDry Prompt Additive 20L
20L RonaScreed FastDry Prompt Additive (formerly RonaScreed 8 Day Overlay) represents a screeding additive for site batched screeds is used to quickly reduce the level of retained moisture within the screed allowing floor coverings to be laid over the screed much sooner than with conventional screeds.
POA Get a quote -
Screed Edging Perimeter Strip Rolls (various sizes)
Edge strip is used with solid (concrete screed) floors around the edge of a room to contribute an expansion gap for the floor as it heats up and cools down. The edging strip is most known as the perimeter strip which acts as a thermal bridge by preventing moisture crossing and reducing heat loss and noise once the screed has been set.
From:£15.19£18.23Ex VATInc VAT Add to cart -
Self Drilling Wafer Head Screws 12mm Pack of 1000
Self Drilling Wafer Head Screws allow quick installation without pre-drilling, secured finish in any project.
£12.55£15.06 Ex VATInc VAT£0.01£0.01 Perf Unit Add to cart -
Stainless Steel EML Expanded Metal Lath Sheet 2500 x 700mm Pack of 10
Stainless Steel EML Expanded Metal Lath Sheet is a durable, corrosion-resistant mesh designed to provide a strong base for rendering and plastering.
£394.37£473.24 Ex VATInc VAT£39.44£47.33 Per Unit Add to cart -
Stainless Steel Plaster Stop Bead 3.0m Pack of 50
Plaster Stop Beads are designed to provide a neat finish for edges and openings that are being plastered.
£335.54£402.65 Ex VATInc VAT£6.71£8.05 Per Unit Add to cart -
Stainless Steel Render Stop Bead 3.0m Pack of 50
£266.29£319.55 Ex VATInc VAT£5.33£6.40 Per Unit Add to cart -
Stainless Steel Rib-Lath Sheet 2500mm x 600mm Pack of 10
Speed Pro Stainless Steel Rib Lath is for internal and external plaster key applications on ceilings and partitions.
£297.80£357.36 Ex VATInc VAT£29.78£35.74 Per Unit Add to cart -
Stainless Steel Standard Angle Bead 3.0m Pack of 50
The Stainless Steel Render Corner Bead is a tough, corrosion-resistant product that protects wall edges and provides with extends walls life span.
£249.47£299.36 Ex VATInc VAT£4.99£5.99 Per Unit Add to cart -
Timber Stud Infill 38 x 22mm x 2.4m Pack of 10
Timber Stud Infills are used as metal stud infills to help form the main structural components of timber frames for drylining use. They are used often used at door openings, to reinforce the metal stud to allow door frames to be fixed securely in place.
£19.88£23.86 Ex VATInc VAT£1.99£2.39 Per Unit Add to cart -
Timber Stud Infill 50mm x 22mm x 2.4m Pack of 10
Timber Stud Infills are used as metal stud infills to help form the main structural components of timber frames for drylining use. They are used often used at door openings, to reinforce the metal stud to allow door frames to be fixed securely in place.
£24.88£29.86 Ex VATInc VAT£2.49£2.99 Per Unit Add to cart -
Timber Stud Infill 60mm x 22mm x 2.4m Pack of 10
Timber Stud Infills are used as metal stud infills to help form the main structural components of timber frames for drylining use. They are used often used at door openings, to reinforce the metal stud to allow door frames to be fixed securely in place.
£33.00£39.60 Ex VATInc VAT£3.30£3.96 Per Unit Add to cart -
Wondertex Filler (Plasterboard Joint Filler) 12.5kg
A plaster based fast setting compound for the bedding and filling of tapes, external metal angles and corner tapes.
£9.33£11.20 Ex VATInc VAT Add to cart -
Wondertex Plasterboard Finishing Compound 25kg
Wondertex prem finish is suitable for the finishing of all plasterboard joints. It is specially developed for hand and machine jointing and may be referred to in the marketplace as joint cement.
£21.04£25.25 Ex VATInc VAT Add to cart -
Wondertex Prem Fill & Finish 15kg
Wondertex prem fill & finish is a filler and smoother, designed for filling and finishing plasterboard joints and smoothing unwanted textured surfaces.
£14.97£17.96 Ex VATInc VAT Add to cart -
100mm Knauf DriTherm 32 Cavity Wall Insulation Slab 455mm x 1200mm 3.27m2 Pack
100mm DriTherm Cavity Slab 32 is a water-repellent Glass Mineral Wool slab designed for use in external full-fill masonry cavity walls, that offers the best thermal performance in the range. It is non-combustible with the best possible Euroclass A1 reaction to fire classification.
£33.63£40.36 Ex VATInc VAT£10.28£12.34 Per m2 Add to cart -
100mm Knauf DriTherm 37 Cavity Wall Insulation Slab 455mm x 1200mm 6.55m2 Pack
100mm DriTherm Cavity Slab 37 is a water-repellent Glass Mineral Wool slab, designed for use in external full-fill masonry cavity walls, that offers excellent thermal performance. It is non-combustible with the best possible Euroclass A1 reaction to fire classification
£32.91£39.49 Ex VATInc VAT£5.02£6.02 Per m2 Add to cart -
150mm Knauf DriTherm 32 Cavity Wall Insulation Slab 455mm x 1200mm 2.18m2 Pack
150mm DriTherm Cavity Slab 32 is a water-repellent Glass Mineral Wool slab designed for use in external full-fill masonry cavity walls, that offers the best thermal performance in the range. It is non-combustible with the best possible Euroclass A1 reaction to fire classification.
£33.90£40.68 Ex VATInc VAT£15.55£18.66 Per m2 Add to cart -
100mm Celotex CW4100 Cavity Wall Insulation Board 1200mm x 450mm 3.24m2 Pack of 6 (3.24m2)
100mm Celotex CW4100 Cavity Wall Insulation Board is an easy to install polyisocyanurate (PIR) insulation board with excellent thermal performance, featuring a low emissivity foil facing.
£63.73£76.48 Ex VATInc VAT£19.67£23.60 Per M2 Add to cart -
100mm Celotex GA4100 PIR Insulation Board 2400mm x 1200mm (8′ x 4′) 2.88m2
100mm Celotex GA4100 is a polyisocyanurate (PIR) insulation core with composite aluminium foil facings on both sides. Celotex is a multi-purpose insulation board suitable for use in pitched roofs, ceilings, floors and walls.
£44.37£53.24 Ex VATInc VAT£15.41£18.49 Per M2 Add to cart -
100mm Ecotherm Eco-Bond PIR Insulation Board 1200mm x 1200mm (4′ x 4′) Pack of 4 (5.76m2)
100mm Eco-Bond PIR insulation boards provide a lightweight, easy-to-install solution for new roofs or upgrading existing ones. Ideal for use with fully adhered single-ply waterproofing on concrete, metal, and timber decks.
POA Get a quote -
100mm Ecotherm Eco-Cavity Partial Fill Insulation Board 1200mm x 450mm Pack of 5 (2.70m2)
100mm Ecotherm Eco-Cavity wall insulation boards are ideal for masonry walls. They achieve high levels of thermal performance for thinner constructions whilst maintaining a clear residual air gap; effective protection against driving rain, particularly in coastal and exposed locations.
POA Get a quote -
100mm Ecotherm Eco-Torch PIR Insulation Board 1200mm x 600mm (4′ x 2′) Pack of 5 (3.60m2)
100mm Eco-Torch PIR Insulation Board is a flexible insulation option, perfect for torch-on, roll-and-pour felt systems, mastic asphalt, and single-ply systems.
POA Get a quote -
100mm Ecotherm Eco-Versal Rigid PIR Insulation Board 2400mm x 1200mm (8′ x 4′) 2.88m2
100mm Ecotherm Eco-Versal is a polyisocyanurate (PIR) insulation core with composite aluminium foil facings on both sides. Ecotherm Eco-Versal is a multi-purpose insulation board suitable for use in pitched roofs, ceilings, floors and walls.
£39.67£47.60 Ex VATInc VAT£13.77£16.52 Per M2 Add to cart -
100mm Expanded Polystyrene EPS70 Insulation Board 2400mm x 1200mm (8′ x 4′) 2.88m2 (Pack of 6)
100mm EPS70, often known as Expanded Polystyrene, is a lightweight foam product produced from tiny polystyrene beads. Due to its high thermal value and simplicity of usage, it is commonly used as one of the most favoured insulation materials in construction.
POA Get a quote -
100mm IKO Enertherm ALU PIR Insulation Board 2400mm x 1200mm (8′ x 4′) 2.88m2
100mm IKO Enertherm ALU PIR (polyisocyanurate) insulation is a top-quality insulation board featuring a rigid PIR foam core and reflective aluminium foil facings. It delivers outstanding thermal performance and moisture resistance, making it suitable for various installations and an ideal choice for different energy-efficient projects.
POA Get a quote -
100mm Kingspan GreenGuard GG500 Extruded Polystyrene Insulation Board 1250mm x 600mm (Pack of 4)
100mm Kingspan GreenGuard GG500 is a high performance rigid extruded polystyrene insulation. It is used to insulate inverted roofs, basements, car park decks, and heavy-duty commercial, industrial and cold store flooring offering thermal conductivities as low as 0.034 W/m·K
Non-refundable.
POA Get a quote -
100mm Kingspan GreenGuard GG700 Extruded Polystyrene Insulation Board 1250mm x 600mm (Pack of 4)
100mm Kingspan GreenGuard GG700 is a high performance rigid extruded polystyrene insulation. It is used to insulate inverted roofs, basements, car park decks, and heavy-duty commercial, industrial and cold store flooring offering thermal conductivities as low as 0.034 W/m·K
Non-refundable.
POA Get a quote -
100mm Kingspan Therma TP10 / TF70 / TW55 PIR Insulation Board 2400mm x 1200mm (8′ x 4′) Pack of 3 (8.64m2)
All three models 100mm Kingspan Therma PIR Insulation Board:
- 100mm Thermapitch TP10
- 100mm Thermafloor TF70
- 100mm Thermawall TW55
share the same high-performance PIR core and low-emissivity foil facings, offering excellent thermal efficiency and easy installation. Although labeled differently, these boards share identical technical specifications.
£176.72£212.06 Ex VATInc VAT£20.45£24.54 Per M2 Add to cart
