The EcoTherm insulation board is a rigid PIR (polyisocyanurate) panel designed to prevent heat loss in buildings. Its thin and light structure makes it suitable for use in spaces where space and strength matter.
EcoTherm insulation sheet is a flat, foil-faced sheet made from polyisocyanurate (PIR) foam core in the middle and protective aluminium foils on both sides. The foam core traps heat, while the foil facings reflect radiant heat and protect the core from moisture and mechanical damage.
EcoTherm insulation boards must be installed above the Damp Proof Membrane (DPM) when used for floor insulation. They are suitable for domestic ground-bearing floors and ground-supported concrete slab systems, and have high dimensional stability.
They are commonly sold in various product ranges, such as Eco-Versal (versatile use), Eco-Cavity (for masonry cavity walls), and Eco-Bond, Eco-Torch, and Eco-Fix (for flat roofs only). These insulation boards can have a long service life depending on the background and supporting structure.
It is commonly installed in:
Builders choose it for floors that carry weight because many EcoTherm boards are designed to take loads.
UK solid-floor guidance recommends laying a DPM before rigid board installation.
EcoTherm insulation comes in these ranges:
Eco-Versal is a multi-performance panel made for wall and floor systems, pitched roofs, and ceilings. For floors, fit it above the DPM. It gives strong insulation in a small thickness and is suitable for applications that require solid thermal performance without adding bulk.
Eco-Cavity is specifically designed for installation between two masonry leaves in cavity wall construction. It comes in a size that allows installers to place wall ties correctly and leave a clear air gap in line with cavity-wall requirements. A thin construction that offers solid thermal gain.
Eco-Bond is intended for the fully adhered, single-ply flat-roof system and mechanically fixed membrane on timber, metal, and concrete decks. That means the membrane is stuck or fixed to the board rather than loose-laid.
Eco-Torch is designed for roofs that use torch-applied or roll-and-pour bitumen felts. One side is prepared to accept hot bitumen or torching so the waterproof layer bonds reliably. Use Eco-Torch with torch-on felt or mastic asphalt finishes.
Eco-Fix is mechanically fixed and accepts single-ply membranes. There are flat and tapered versions for drainage and falls. It is BBA-assessed for use on limited-access concrete, timber, and metal decks, so it is a good pick where a contractor will screw or fix the board down.
Here are some perks of using an EcoTherm board:
Here’s why trades and builders choose EcoTherm sheets from Insulation Wholesale:
Looking for EcoTherm PIR insulation for floors or roofs? We offer trade stock and next-day delivery options. Contact our sales team for stock, sizing, and delivery choices.
Purchase EcoTherm insulation boards online from Insulation Wholesale. We offer the complete range of EcoTherm insulation – Eco-Versal PIR boards, Eco-Fix roofing boards, Eco-Bond roof panels, Eco-Torch roofing PIR, and Eco-Cavity panels (full-fill and partial-fill cavity options). Contact us for a fast quote with prompt delivery across the UK.
Yes, EcoTherm PIR boards give high thermal performance per millimetre. They meet standard test needs (thermal, compression, and surface spread ratings), but always check the product datasheet for the specific board you plan to use.
For safety, use a stable workbench and wear gloves, eye protection, and a dust mask.
100mm Ecotherm Eco-Versal is a polyisocyanurate (PIR) insulation core with composite aluminium foil facings on both sides. Ecotherm Eco-Versal is a multi-purpose insulation board suitable for use in pitched roofs, ceilings, floors and walls.
120mm Ecotherm Eco-Versal is a polyisocyanurate (PIR) insulation core with composite aluminium foil facings on both sides. Ecotherm Eco-Versal is a multi-purpose insulation board suitable for use in pitched roofs, ceilings, floors and walls.
The 150mm Ecotherm Eco-Versal is a polyisocyanurate (PIR) insulation core with composite aluminium foil facings on both sides. Ecotherm Eco-Versal is a multi-purpose insulation board suitable for use in pitched roofs, ceilings, floors and walls.
40mm Ecotherm Eco-Versal is a polyisocyanurate (PIR) insulation core with composite aluminium foil facings on both sides. Ecotherm Eco-Versal is a multi-purpose insulation board suitable for use in pitched roofs, ceilings, floors and walls.
50mm Ecotherm Eco-Versal is a polyisocyanurate (PIR) insulation core with composite aluminium foil facings on both sides. Ecotherm Eco-Versal is a multi-purpose insulation board suitable for use in pitched roofs, ceilings, floors and walls.
60mm Ecotherm Eco-Versal is a polyisocyanurate (PIR) insulation core with composite aluminium foil facings on both sides. Ecotherm Eco-Versal is a multi-purpose insulation board suitable for use in pitched roofs, ceilings, floors and walls.
70mm Ecotherm Eco-Versal is a polyisocyanurate (PIR) insulation core with composite aluminium foil facings on both sides. Ecotherm Eco-Versal is a multi-purpose insulation board suitable for use in pitched roofs, ceilings, floors and walls.
75mm Ecotherm Eco-Versal is a polyisocyanurate (PIR) insulation core with composite aluminium foil facings on both sides. Ecotherm Eco-Versal is a multi-purpose insulation board suitable for use in pitched roofs, ceilings, floors and walls.
80mm Ecotherm Eco-Versal is a polyisocyanurate (PIR) insulation core with composite aluminium foil facings on both sides. Ecotherm Eco-Versal is a multi-purpose insulation board suitable for use in pitched roofs, ceilings, floors and walls.
Eco-Cavity Full Fill is suitable for full fill cavity wall applications while maintaining a residual 10 mm cavity. The residual cavity helps resist moisture transfer, aids installation, and accommodates mortar squeeze. The tongue and groove edges to ensure a continuous layer of insulation, increasing protection from wind driven rain and aiding installation.
90mm Ecotherm Eco-Versal is a polyisocyanurate (PIR) insulation core with composite aluminium foil facings on both sides. Ecotherm Eco-Versal is a multi-purpose insulation board suitable for use in pitched roofs, ceilings, floors and walls.
100mm Eco-Bond PIR insulation boards provide a lightweight, easy-to-install solution for new roofs or upgrading existing ones. Ideal for use with fully adhered single-ply waterproofing on concrete, metal, and timber decks.
100mm Ecotherm Eco-Cavity wall insulation boards are ideal for masonry walls. They achieve high levels of thermal performance for thinner constructions whilst maintaining a clear residual air gap; effective protection against driving rain, particularly in coastal and exposed locations.
100mm Eco-Torch PIR Insulation Board is a flexible insulation option, perfect for torch-on, roll-and-pour felt systems, mastic asphalt, and single-ply systems.
110mm Ecotherm Eco-Versal is a polyisocyanurate (PIR) insulation core with composite aluminium foil facings on both sides. Ecotherm Eco-Versal is a multi-purpose insulation board suitable for use in pitched roofs, ceilings, floors and walls.
Eco-Cavity Full Fill is suitable for full fill cavity wall applications while maintaining a residual 10 mm cavity. The residual cavity helps resist moisture transfer, aids installation, and accommodates mortar squeeze. The tongue and groove edges to ensure a continuous layer of insulation, increasing protection from wind driven rain and aiding installation.
120mm Eco-Bond PIR insulation boards provide a lightweight, easy-to-install solution for new roofs or upgrading existing ones. Ideal for use with fully adhered single-ply waterproofing on concrete, metal, and timber decks.
120mm Eco-Torch PIR Insulation Board is a flexible insulation option, perfect for torch-on, roll-and-pour felt systems, mastic asphalt, and single-ply systems.
125mm Ecotherm Eco-Versal is a polyisocyanurate (PIR) insulation core with composite aluminium foil facings on both sides. Ecotherm Eco-Versal is a multi-purpose insulation board suitable for use in pitched roofs, ceilings, floors and walls.
130mm Eco-Bond PIR insulation boards provide a lightweight, easy-to-install solution for new roofs or upgrading existing ones. Ideal for use with fully adhered single-ply waterproofing on concrete, metal, and timber decks.
130mm Eco-Torch PIR Insulation Board is a flexible insulation option, perfect for torch-on, roll-and-pour felt systems, mastic asphalt, and single-ply systems.
130mm Ecotherm Eco-Versal is a polyisocyanurate (PIR) insulation core with composite aluminium foil facings on both sides. Ecotherm Eco-Versal is a multi-purpose insulation board suitable for use in pitched roofs, ceilings, floors and walls.
140mm Eco-Bond PIR insulation boards provide a lightweight, easy-to-install solution for new roofs or upgrading existing ones. Ideal for use with fully adhered single-ply waterproofing on concrete, metal, and timber decks.
The 140mm Ecotherm Eco-Versal is a polyisocyanurate (PIR) insulation core with composite aluminium foil facings on both sides. Ecotherm Eco-Versal is a multi-purpose insulation board suitable for use in pitched roofs, ceilings, floors and walls.
150mm Eco-Bond PIR insulation boards provide a lightweight, easy-to-install solution for new roofs or upgrading existing ones. Ideal for use with fully adhered single-ply waterproofing on concrete, metal, and timber decks.
25mm Eco-Bond PIR insulation boards provide a lightweight, easy-to-install solution for new roofs or upgrading existing ones. Ideal for use with fully adhered single-ply waterproofing on concrete, metal, and timber decks.
25mm Ecotherm Eco-Fix PIR Insulation Board these rigid boards are designed to work with mechanically attached single-ply waterproofing membranes on concrete, metal, or timber decks.
25mm Ecotherm Eco-Versal is a polyisocyanurate (PIR) insulation core with composite aluminium foil facings on both sides. Ecotherm Eco-Versal is a multi-purpose insulation board suitable for use in pitched roofs, ceilings, floors and walls.
30mm Ecotherm Eco-Versal is a polyisocyanurate (PIR) insulation core with composite aluminium foil facings on both sides. Ecotherm Eco-Versal is a multi-purpose insulation board suitable for use in pitched roofs, ceilings, floors and walls.